Publicité
Les langues disponibles
Les langues disponibles
LIFT THE BIKE ONTO THE CARRIER.
• Raise up the bike.
• Pivot the bike and the fork base.
• Set the boom tube into the tray.
• TIGHTEN THE KNOB!
Slide the spacer pads
onto the tray straps.
Decide which pad direction works
best for good strap and tube contact.
Wide Frames:
Thick side UP.
slender Frames:
Thick side DoWn.
1032613E-7/24
boom tube
(tighten)
IF NECESSARY:
The tray can be adjusted
by loosening the two nuts
below the tray.
1/2"
REMEMBER TO
TIGHTEN THE NUTS AFTER
SLIDING THE TRAY!
(pivot)
Secure the Bike's boom tube
with the tray straps.
(raise)
REVERSE THE
PROCESS TO
UNLOAD THE BIKE.
• Insert strap ends be-
hind the red buttons.
• Pull the straps tightly
against the tube.
Publicité
