Manufacturers Warranty - Tools; Disposal; Ec Declaration Of Conformity - Hilti TE 6-A Mode D'emploi

Manufacturers warranty – tools
Hilti warrants that the tool supplied is free of defects
in material and workmanship. This warranty is valid so
long as the tool is operated and handled correctly,
cleaned and serviced properly and in accordance with
the Hilti Operating Instructions, and the technical sys-
tem is maintained. This means that only original Hilti
consumables, components and spare parts may be
used in the tool.
This warranty provides the free-of-charge repair or
replacement of defective parts only over the entire lifes-
pan of the tool. Parts requiring repair or replacement
as a result of normal wear and tear are not covered by
this warranty.

Disposal

Return waste material for recycling.
Most of the materials from which Hilti power tools are
manufactured can be recycled. The materials must be
correctly separated before they can be recycled. In
many countries, Hilti has already made arrangements
for taking back your old electric tools for recycling.
Please ask your Hilti customer service department or
Hilti sales representative for further information.
Dispose of the battery in accordance with national reg-
ulations or return used batteries to Hilti for recycling.
Dispose of defective batteries without delay. Keep them
out of reach of children. Do not attempt to open or dis-
mantle batteries and do not dispose of them by
incineration.
Only for EU countries
Disposal of electric tools together with household waste
is not permissible!
In observance of European Directive 2002/96/EC on
waste electrical and electronic equipment and its imple-
mentation in accordance with national law, electric tools
that have reached the end of their life must be collected
separately and returned to an environmentally compat-
ible recycling facility.
CAUTION
Improper disposal of the equipment may have serious
consequences:
Printed: 07.07.2013 | Doc-Nr: PUB / 5071061 / 000 / 00
Additional claims are excluded, unless stringent
national rules prohibit such exclusion. In particular,
Hilti is not obligated for direct, indirect, incidental
or consequential damages, losses or expenses in
connection with, or by reason of, the use of, or inabil-
ity to use the tool for any purpose. Implied warranties
of merchantability or fitness for a particular purpose
are specifically excluded.
For repair or replacement, send tool or related parts
immediately upon discovery of the defect to the address
of the local Hilti marketing organization provided.
This constitutes Hilti's entire obligation with regard to
warranty and supersedes all prior or contemporane-
ous comments and oral or written agreements con-
cerning warranties.
– The burning of plastic components generates toxic
fumes which may present a health hazard.
– Batteries may explode if damaged or exposed to very
high temperatures, causing poisoning, burns, acid
burns or environmental pollution.
– Careless disposal may permit unauthorized and improp-
er use of the equipment. This may result in serious
personal injury, injury to third parties and pollution
of the environment.

EC declaration of conformity

Description:
Designation:
Year of design:
We declare, under our sole responsibility, that this
product complies with the following directives and
standards: until 28.12.2009 98/37/EC, as of 29.12.2009
2006/42/EC, 2004/108/EC, 2006/66/EC, EN 55 014-1,
EN 55 014-2, EN 60745-1, EN 60745-2-6.
Hilti Corporation
Peter Cavada
Head of BU
Quality and Process Management
BA Electric Tools & Accessories
11/2006
Cordless rotary hammer
TE 6-A / TE 6-A Li
1998 / 2006
Matthias Gillner
Head of BA
Electric Tools & Accessories
11/2006
19
en