Care And Maintenance; Troubleshooting; Disposal; Manufacturer's Warranty - Tools - Hilti TE DRS-M Mode D'emploi

6 Care and maintenance

CAUTION
Unplug the supply cord from the power outlet or, if
using a cordless tool, move the forward / reverse
switch to the middle position.
6.1 Care of insert tools
Clean off dirt and dust deposits adhering to the insert
tools and protect them from corrosion by wiping the
insert tools from time to time with an oil-soaked rag.

7 Troubleshooting

Fault
Excessive dust emission

8 Disposal

Most of the materials from which Hilti tools or appliances are manufactured can be recycled. The materials must
be correctly separated before they can be recycled. In many countries, Hilti has already made arrangements for
taking back old tools and appliances for recycling. Ask Hilti customer service or your Hilti representative for further
information.

9 Manufacturer's warranty - tools

Please contact your local Hilti representative if you have
questions about the warranty conditions.
6.2 Caring for the appliance
CAUTION
Do not use water, oil, grease or cleaning agents.
Use only a dry brush and a cloth to clean the appliance.
Wear respiratory protection when doing this.
6.3 Maintenance
Check all external parts of the appliance for damage
at regular intervals and check that all controls operate
faultlessly. Do not operate the appliance if parts are
damaged or when the controls do not function faultlessly.
If necessary, the appliance should be repaired at a Hilti
repair center.
Possible cause
The dust container is full.
The suction head is defective.
Remedy
Emptying the dust container
Replacing the suction head
en
9