Publicité
Les langues disponibles
Les langues disponibles
English
Accepting door calls
The ringing tones for the front
door, apartment door and internal
telephony are different. When a
visitor presses the door bell, the in-
house telephone rings. The call can
be accepted within 30 seconds of
the last ring tone.
Actuating the door release
When you press the door release
button, the door from which the
last call came is opened for 3
seconds.
Switching on the light
When you press the light button,
the lighting is switched on, provi-
ded this has been connected by
your electrical installer.
Setting the ring tone volume
The rotary controller is able to
regulate the ring tone volume from
very quiet to maximum volume.
The bell is muted by turning the
rotary controller past a slight resi-
stance point as far to the left as it
will go.
The speech volume of the receiver
and the ring tone melody cannot
be changed.
Control functions
With the receiver down, the free
buttons can execute various swit-
ching and control functions, such
as switching on the light. The
function depends on how your
electrical installer has configured
the system.
Internal calls
Lift the receiver and press one of
the buttons in order to call internal
users. Use the lettering panel to
inscribe the relevant name.
Only possible with additional
installation.
6
Illuminated display
Depending on the installation,
there are two buttons which can
light up yellow.
It is possible to use these to indica-
te e.g. an open front door or light
switched on. For more detailed
information, please contact your
electrical installer.
Video memory
The deluxe in-house telephone
with colour monitor is equipped
with a video memory. All visitor
pictures are saved with the date
and time.
Up to 28 pictures can be saved in
the device. Once the memory
capacity has been used up, the
oldest picture is overwritten each
time a new picture is taken. After
a power cut, pictures saved in the
in-house telephone are deleted.
Publicité
