Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
13. Press the
button to turn on the appliance.
14. Tap the
button repeatedly, until the indicator light beside
lights up.
NOTE:
If you do not want your coffee to be kept warm after the brewing
process, tap the
button until the indicator light beside the
symbol as well as the indicator light beside "non-keep warm" lights
up.
15. Use the button
to select the number of cups of coffee you want to
3 -10
brew.
NOTE:
Each touch of the button changes to a different number of cups. The
red control light indicates the odd numbers, the green control light
indicates the even numbers of cups.
16. You also have influence on the strength of the coffee. Use the
button to determine, whether more or less coffee will be ground.
Tap the button repeatedly, until the indicator light next to the desired
setting switches on.
0 = Standard setting
+1 / +2 = approx. + 6 % stronger coffee (more coffee powder)
– 1 / – 2 = approx. - 6 % more mild coffee (less coffee powder)
17. Press and hold the
button for 2 seconds to start the coffee prepa-
ration. The display shows a rotation of the segment lighting
The indicator light next to "grind" flashes. The coffee grinder will be
unlocked and the coffee will be ground.
NOTE:
If the filter holder is not inserted correctly, the following symbol
appears in the display:
.
• Pull out the filter holder and insert it correctly. Press the
again.
18. After the grinding process, the appliance automatically locks the
coffee grinder. Now the brewing process starts. The control lamp next
to "brew" flashes.
Preparation with Coffee Powder
Please follow the instructions under points "Preparing the Coffee
Machine". Add coffee powder before you insert the filter holder into the
coffee machine.
NOTE:
Do not put too much coffee powder into the filter to avoid spillage.
9. Press the
button to turn on the appliance.
10. Tap the
button repeatedly, until the indicator light beside
lights up.
NOTE:
If you do not want your coffee to be kept warm after the brewing
process, tap the
, button until the indicator light beside the
symbol as well as the indicator light beside "non-keep warm" lights
up
11. Press and hold the
button for 2 seconds to start the coffee prepara-
tion. The display shows a rotation of the segment lighting
indicator light next to „brew" flashes.
Interruption of the Brewing Process
CAUTION:
If you remove the glass jug during the brewing process, the process
is not stopped. If you do not place back the glass jug onto the hotplate
within 20 seconds, the coffee may run over the edge of the filter holder.
If you want to remove the jug for a short time during the brewing process,
proceed as follows:
PC-KA1138_IM_new
• Briefly tap the
button. The rotation of the segments in the display
icon
stops. The control lamp next to "brew" lights up. The brewing process
stops.
• If you want to continue the brewing process, place back the glass jug
onto on the hotplate and briefly tap the
The Coffee is Ready
• Once the brewing process is finished, the control lamp next to "brew"
turns off. If you have previously set a keep- warm time, the indicator
light next to "warm" flashes. The display shows . The warm-keeping
process starts. The appliance counts up to the set time.
• After the keep-warm period has elapsed, the light next to "warm"
switches off. The indicator light next to "clean" lights up on to remind
you to dispose of the paper filter. It will not switch off until you remove
the filter holder.
• If you have not set a keep-warm time, or the "non-keep warm" function
is activated, the control light next to "clean" lights up immediately after
the brewing process.
• When no more coffee is flowing through the filter you can remove the
pot.
• Turn the appliance off.
• Would you like to keep the remaining coffee warm? Leave the appli-
ance turned on until the end of the keep-warm period. If you wish to
keep the coffee warm even after the keep-warm period has finished,
pour the remaining coffee into a thermal flask.
.
NOTE:
We recommend to pull out the filter holder out of the coffee machine
immediately, to ensure that the filter holder insert dries out.
WARNING:
If you want to make another pot of coffee immediately, switch off the
button
appliance first. Let it cool down with the water tank open in order to
avoid hot water splashing when refilling with water.
Coffee Preparation with Programmed Timer Operation
You have the option to set 2 different starting times for your coffee ma-
chine to start with the coffee automatically.
CAUTION:
Everything must be ready for the preparation of the coffee. See chapter
"Preparing the Coffee Machine".
NOTE:
For automatic start of preparation at the set time, the appliance need to
be in standby-mode.
icon
Set the Program Timer
1. Press the
button to switch on the appliance.
2. Press and hold the
seconds. The corresponding indicator light flashes. The display shows
the time.
h
3. Use the
button to set the hour of the start time.
min
4. Confirm your desired setting with the relevant program button.
5. Use the
h
button to set the minutes of the start time.
min
. The
6. Confirm your desired setting with the relevant program button. The
current time appears in the display again.
Switch the Program Timer On / Off
NOTE:
You are only able to activate one of the two program timers.
1. Press the
button to switch on the appliance.
2. Tap the program button of the timer you want to activate or disable. If
the timer is activated, the corresponding control lamp lights up above
the buttons.
button again.
(program 1) or
(program 2) button for 4
1
2
11.09.2017
37
Publicité
Chapitres
Table des Matières
Dépannage
