Technical Data; Disposal; Meaning Of The "Dustbin" Symbol - Proficook PC-KA 1138 Mode D'emploi

Problem
Coffee grounds in the coffee.
The brewing process takes too
long.
The appliance turns off automat-
ically.
The coarseness level regulator
cannot be adjusted.
The grinder becomes slower and
louder.

Technical Data

Model:.........................................................................................PC-KA 1138
Power supply:............................................................220 - 240 V~, 50 / 60 Hz
Power consumption: ................................................................ 900 W max.*
Filling quantity: ................................................................................. 1,3 Litre
Protection class: ...........................................................................................
Net weight: ............................................................................approx. 3,85 kg
(*Total output of all components)
The right to make technical and design modifications in the course of
continuous product development remains reserved.
This appliance has been tested according to all relevant current CE guide-
lines, such as electromagnetic compatibility and low voltage directives,
and has been constructed in accordance with the latest safety regulations.
PC-KA1138_IM_new
Possible cause
The paper filter is too small.
Too much coffee powder in the filter.
Limescale deposits in the appliance.
This is not a malfunction of the appliance.
In order to comply with the Ecodesign Directive
(2009 / 125 / EC), the appliance turns off automatically
after max. 40 minutes after the brewing process has
finished.
The filter holder is inserted incorrectly.
The filter holder is dirty.
The grinder is tilted.
The coarseness level regulator is overheated by
frequent use.
The grinder lid was inserted incorrectly.
A bean has jammed.
Heavy contamination and foreign objects in the grist.
Notes / Solution
Use a paper filter size "1 x 4".
Use less coffee powder.
Decalcify the appliance as described.
Pull it out and insert it again. It need to close up with the
upper side completely. It must audibly lock into place.
1. Clean the filter holder insert of the appliance as
described in the chapter  "Filter Holder Insert" .
2. Disconnect the unit from the power supply. Wait a
few seconds and reconnect again.
1. Unplug the power cord.
2. Carry out maintenance as described under chapter
 "Maintenance of Grinder".
1. Allow the engine to cool down.
2. Disconnect the unit from the power supply. Wait a
few seconds and reconnect again.
Insert the grinder lid correctly. To clear the error mes-
sage, you have to pull out the mains plug.
Start a new grinding process and then try again. Do not
force the blocked regulator to turn.
Carry out maintenance.

Disposal

Meaning of the "Dustbin" Symbol

Protect our environment: do not dispose of electrical equip-
ment in the domestic waste.
Please return any electrical equipment that you will no longer
use to the collection points provided for their disposal.
This helps avoid the potential effects of incorrect disposal on
the environment and human health.
This will contribute to the recycling and other forms of re-utilisation of
electrical and electronic equipment.
Information concerning where the equipment can be disposed of can be
obtained from your local authority.
39
11.09.2017