Yamaha CD-NT670 Mode D'emploi page 24

Configuring network connection
1
Press .
• The option menu is shown on the front panel
display.
2
Select [Network Config] with
and press .
3
Select [Select Network] with
and press .
4
Select [Direct] with / , and press
.
5
Select desired security method with
/ , and press .
• Available choices are: [OPEN], [WPA2-PSK(AES)]
6
Check the SSID and the security key.
• These values are required for Wi-Fi setting of the
mobile device.
• You can check the value from the option menu -
[Network Info] - [Direct Info].
7
Configure the Wi-Fi setting of the
mobile device.
• Enable the Wi-Fi function of the mobile device.
• When the access points are listed, select the SSID
you have checked in step 6.
• When the terminal prompts you to enter a
password, enter the security key you have
checked in step 6.
20
En
/ ,
/ ,
• If you select [OPEN] in step 5, the connection may
be insecure since the communication is not
encrypted.
1
OPTION
2 3 4 5
, , ,
/
ENTER