Supported Devices/Media And File Formats - Yamaha CD-NT670 Mode D'emploi

Supported devices/media and file formats

Supported devices/
medias
PCs
PC with Windows Media Player 11 or Windows Media
Player 12 installed.
NAS
NAS compatible with DLNA version 1.5.
USB devices
• The unit is compatible with USB mass storage class
devices (e.g., flash memories or portable audio players)
using FAT16/FAT32 format.
• Do not connect devices other than the USB mass storage class
devices (USB charger, USB hub, etc.), PCs, card readers, and
external hard discs.
• USB devices with encryption cannot be used.
• Depending on the manufacturer or type of the USB
device, the unit may not recognize the USB device or
some functions may be unavailable.
Discs
• This unit is designed for use with audio CD, CD-R/RW
(ISO 9660 format) with any of the following logos
printed on the disc or the disc jacket.
Audio CD
CD-R/RW*
* Discs which bear one of the following.
FOR CONSUMER
FOR CONSUMER USE
FOR MUSIC USE ONLY
• 8-cm discs are playable with this unit.
Set a disc in the inner recessed area of the disc tray.
Notes on discs
• Do not set any other type of disc other than stated
above in this unit. Doing so may damage the unit.
• CD-R/RW cannot be played back unless finalized.
Finalization means the process for making a disc to be
ready for playback on a compatible device .
• Some discs cannot be played back depending on the
disc characteristics or recording conditions.
• Do not use any non-standard shaped discs such as a
heart-shaped disc.
• Do not use discs with many scratches or a crack on their
surface, or warped/glued discs.
Handling discs
• Do not touch the surface of the disc.
Hold a disc by its edge or center hole.
• Use a soft-tipped pen when writing
on the label side of a disc.
• Do not put tape, seal, glue, etc., on a disc.
• Do not use a protective cover to prevent scratches.
• Do not set foreign object on the disc tray.
• Do not set more than one disc in this unit at one time.
This could cause damage to both this unit and the discs.
• If a disc becomes dirty, wipe it
with a clean, dry soft cloth from
the center out to the edge. Do not
use record cleaner or paint
thinner.
• Do not use any lens cleaners as
they may cause malfunction.
• Do not expose discs to direct sunlight, high
temperature, high humidity, or dust.
• When a disc is not being used, remove it from this unit
and store in an appropriate case.
53
En