EN
min.
8 oz
200 ml
1.
2.
5.
min.
8 oz
200 ml
3.
click
4.
Turn the on/off switch on (I).
►
All display items will light up briefly and
then Stand-by stays lit.
Select a large cup (min. 8 oz / 200 ml)
►
and place it on the cup shelf.
1. Open the brewing unit by lifting the lid.
►
2. Place the Service T DISC on the
T DISC holder with the barcode facing
down. Make sure that the flap of the
T DISC is secured in the slot to the
right.
3. Now close the brewing unit by pushing
the lid down firmly until it audibly clicks
into place.
4. Press the start /stop button.
The cleaning process starts and
dispenses water into the cup.
5. When the process is complete, empty
the cup and put it back on the cup
stand.
Important:
!
Repeat steps & 5 another times.
Open the brewing unit, remove the
►
Service T DISC and store it in the
compartment at the back of the machine
behind the water tank.
5
1/2009