Jenn-Air T2 JGR8750BDB Guide De L'utilisateur page 8

O
C
VEN OOKING
C L P
ONTROL OCK AD
The touch pads on the control can be locked
for cleaning and to prevent unwanted use.
They will not function when locked. The
current time of day will remain in the display
when this feature is activated.
If an oven function is currently being used,
the controls cannot be locked.
TO SET: Press Control Lock pad for
several seconds. A single beep will sound
when control is locked.
If any pad is pressed when Control Lock is
activated, OFF will appear in the display for
15 seconds.
TO RESTORE: Press and hold the Con-
trol Lock pad for several seconds. The
indicator word OFF will disappear.
S C
ETTING THE LOCK
1. Press Clock pad.
• The indicator word TIME will flash in
the display.
2. Press the appropriate number pads until
the correct time of day appears in the
display.
When electrical power is supplied or after a
power interruption, the last clock time be-
fore power was interrupted will flash.
To recall the time of day when another time
function is showing, press the Clock pad.
Clock time cannot be changed when the
oven has been programmed for clock con-
trolled cooking, self-clean or delayed self-
clean.
S T
ETTING THE IMER
Use to set and then signal the completion of
a time period up to 99 hours and 59 minutes
(99:59).
The timer can be used independently of any
other oven activity and can be set while
another oven function is operating. The
timer does not control the oven.
, .
CONT
1. Press Timer pad.
• The indicator word TIMER will flash
and "0HR:00" appears in the display.
2. Press the appropriate number pads until
the desired number of minutes or hours
and minutes appear in the display.
Example: To set the Timer for 5
minutes, press the Timer pad and the
number 5 pad. The control will begin
countdown after a four second delay.
0 :05
HR
LOCK
DELAY COOK STOP TIMER
Example: To set the Timer for 1 hour
and 30 minutes, press the Timer pad
and the numbers 1,3,0 pads. The control
will begin countdown after a four sec-
ond delay.
1 :30
HR
LOCK
DELAY COOK STOP TIMER CLEAN ROAST BROIL
3. The last minute of the countdown will
be displayed as seconds.
4. At the end of the time set, one long beep
will sound and "End" will appear in the
display. To change the number of timer
reminder signals, see Control Options.
TO CANCEL:
1. Press and hold Timer pad for several
seconds. The time of day will reappear.
OR
2. Press the Timer pad and the "0" num-
ber pad. After a slight delay the time of
day will reappear.
NOTE: Pressing Stop/Clear pad to can-
cel the timer will cancel ALL selected oven
functions except the timer.
7
C
T
IMER
You have a choice of three "end of timer"
reminder signals:
Option 1: One beep at the end of the timer
operation, then, one beep every 30 seconds
for the next five minutes or until the Stop/
Clear pad is pressed.
Option 2: One beep at the end of the timer
operation, then, one beep every minute for
BAKE
the next 12 hours or until the Stop/Clear
CLEAN ROAST BROIL
pad is pressed.
Option 3: (default option) One beep at
the end of the timer operation, then, no
other beeps.
SETTING THE TIMER BEEPS:
1. Press the Timer and Stop/Clear pads
at the same time and hold for several
BAKE
seconds.
• A single beep will sound.
• Display will show the indicator word
2. Press the appropriate number pad (1, 2,
or 3) to select the option you wish. The
current time of day will reappear in the
display after four seconds.
C
LOCK
C
OOKING
You have a choice of three "end of timed
cook" reminder signals for programmed
cooking:
Option 1: (default option) Four beeps at
the end of cooking then, one beep every 30
seconds for the next five minutes or until
the Stop/Clear pad is pressed.
Option 2: Four beeps at the end of cook-
ing, then, one beep every minute for the
next 12 hours or until the Stop/Clear pad
is pressed.
Option 3: Four beeps at the end of cook-
ing, then, no other beeps.
O
ONTROL PTIONS
B
EEPS
TIMER and the current option – 1, 2,
or 3.
C O
ONTROLLED
B
EEPS
VEN