Parts Supplied - Pioneer AVIC-X1 Manuel D'utilisation

• Never connect speakers with an output rating of less than 50 W channel or impedance
outside of the 4 ohms to 8 ohms specifications to your Navigation system. Connecting
speakers with output and/or impedance values other than those noted here may result in
the speakers catching fire, emitting smoke, or becoming damaged.
• When this product's source is switched ON, a control signal is output through the
blue/white lead. Connect to an external power amp's system remote control (max. 300
mA 12 V DC). If the vehicle features a glass aerial, connect to the aerial booster power
supply terminal.
• When an external power amp is being used with this system, be sure not to connect the
blue lead to the amp's power terminal. Likewise, do not connect the blue/white lead to
the power terminal of the auto aerial. Such connection could cause excessive current
drain and malfunction as well as damage to the auto aerial of the vehicle.

Parts supplied

Display unit
Connector
Extension lead
(for speed signal)
Lock tie
Hide-away unit
30-pin cable
Extension aerial cable
Power cord
Extension lead
(for reverse signal)
System extension connector
6