Keller CellaTemp PA 4x Mode D'emploi page 8

Quick start guide CellaTemp PA
General
This guide gives you the minimum information to properly install the py-
EN rometers of the PA series. For detailed information please refer to the user
guide CellaTemp PA. You can download it from the following link:
www.keller.de/its/
Explanation of symbols
Important safety-related references in this manual are marked with a sym-
bol.
CAUTION: This symbol points out hints and information which
should be heeded for efficient and trouble-free operation.
► Action: This symbol instructs the operator to take action.
> Reaction, Result: This symbol indicates the result of the action
taken.
Laser safety instructions
Class 2 Laser Product
Never look directly into the laser beam path (emitted power <1.0
●
mW at a wavelength of 630-670 nm)
● Do not leave the instrument unattended when the laser is activated.
Do not point the laser beam at any person.
●
During pyrometer installation and alignment, make sure to avoid
●
the possibility of laser light reflections caused by reflective sur-
faces.
All currently valid laser safety standards must be observed.
●
Laser Warning Label
The black and yellow laser warning label is affixed next to the nameplate
of the instrument. An arrow indicates the laser emission path (lens open-
ing).
This symbol points out guidelines. If you do not observe
them, the device might be damaged, malfunctioning or even
fail to operate.