Attachment - Ecolab Rotorsprayintegra Plus Manuel D'utilisation

6.2

Attachment

The Rotorspray integra
The permissible clamp area is to be observed.
If necessary an elastomer strip (rubber sheet) is inserted prior to clamping to protect the
Rotorspray integra
WARNING!
The rotor shaft is to be handled with particular care since even slight damage
due to bending or such like may lead to incorrect speeds and thus to
insufficient wetting with product and reduce the service life of the bearings.
NOTICE!
Attachment is to be effected so that the speed adjustment ring remains
accessible and cleaning of the parts in contact with product is possible at any
time.
PLUS is to be attached using a clamp mounting.
PLUS
from excessive clamping force.
23
Installation
417101448 Rev. 04-02.2019