Maico EZQ-B Série Mode D'emploi page 48

EZQ.. B/D/E, DZQ.. B/D
EZS.. B/D/E, DZS.. B/D
4. Only EZQ.. B/EZS B: Electrically wire capa-
citor [4] to the terminal block (tightening
torque of screws 0.7 Nm). Connect the PE
conductor to the earth terminal (tightening
torque of screw 1.5 Nm).
5. Only DZQ../DZS..: Connect external control
device (
two TK motor terminals. (Tightening torque
of screws 0.7 Nm).
6. Connect on/off switch (on-site).
7. Connect
8. Check that the technical data (
plate) matches.
9. Fit terminal compartment cover [2].
NOTICE: The terminal compartment cover
sealing must be flush all the way around the
motor. Tighten both screws to a tightening
torque of 1.5 Nm.
WARNING for protective grille removal/
attachment: Check that the protective grille
is firmly seated and carry out a PE conductor
test Risk of electric shock.

10. Switch the mains fuse on.
DE
chap. 5) to the terminal block's

Optional
UK
accessories.
VENTILATOREN
rating

FR