Philips SatinPerfect HP6577 Mode D'emploi page 15

5 Rinse all parts (epilator, epilating head and caps) under a lukewarm
tap while turning them.
6 Shake excess water off the parts and let them dry.
Note: For hygienic reasons, make sure all parts are dry before you reassemble
the appliance.
7 To reattach the epilating head, place it on the appliance and press it
onto the appliance until it snaps home.
cleaning the shaving head and the comb
1 Remove the comb, if attached, by pulling it off the shaving head.
2 Press the release button (1) and remove the shaving head from the
appliance (2).
3 Remove the shaving unit from the shaving head.
EnglisH
15