Optical Mode; Operation; Setup Menu - Sonoro MEISTERSTÜCK SO-610 Mode D'emploi

15. Optical mode

15.1

Operation

Your external player (e.g. audio amplifier) must be connected to the optical
input jack of MEISTERSTÜCK with an audio cable (with optical connector, not
supplied).
To access the Optical
mode,
To start and control
playback,
To mute or restore the
sound output,
15.2

Setup menu

Press SETUP in the optical input mode to access the setup menu (see chapter
"Using the menus"). The following options are available and the current settings
(if applicable) are marked with an asterisk (*).
[Bluetooth headphone]
•
To connect or disconnect with a Bluetooth headphone, see chapter "Basic
operation".
[System Settings]
•
See chapter "System Settings".
[Main menu]
•
To access other playback modes or sleep timer.
The optical input is only supporting for the linear PCM, 2 channels 16 bit
or 24bit music source.
96
Press key on the remote control.
Or, press MENU once, then
navigation knob) to select the Optical mode and
then press OK to confirm.
Perform all playback operations on the external
player.
Press or button.
or (or rotate the
© sonoro audio GmbH 2019