Aux In 1 Mode; Operation; Setup Menu - Sonoro MEISTERSTÜCK SO-610 Mode D'emploi

13. AUX In 1 mode

13.1

Operation

Your external player (e.g. Blu-ray player) must be connected to the auxiliary
input jack 1 of MEISTERSTÜCK with an audio cable (with RCA connector, not
supplied).
To access the AUX In 1
mode,
To start and control
playback,
To mute or restore the
sound output,
13.2

Setup menu

Press SETUP in the AUX In 1 mode to access the setup menu (see chapter
"Using the menus"). The following options are available and the current settings
(if applicable) are marked with an asterisk (*).
[Bluetooth headphone]
•
To connect or disconnect with a Bluetooth headphone, see chapter "Basic
operation".
[System Settings]
•
See chapter "System Settings".
[Main menu]
•
To access other playback modes or sleep timer.
94
Press key on MEISTERSTÜCK or remote
control to toggle AUX In. 1 mode.
Or, press MENU once, then
the navigation knob) to select the AUX In 1 mode
and then press OK to confirm.
Perform all playback operations on the external
player.
Press or button.
or (or rotate
© sonoro audio GmbH 2019