Doro AFTI 20 Manuel D'utilisation page 5

Memory
This telephone has 10 indirect memories (0-9).
When a number is stored in a memory location, you need to press only two
buttons to make the call.
The telephone number (or name) stored can be written on the memory label
located under the hook switch cover. To remove and insert the memory label use
a thin item to 'grab' the label.
Please note that the hook-switch itself cannot be opened.
Storing numbers
1. Lift the receiver and press store button
2. Press memory button
3. Select memory location by pressing one of the number keys
4. Enter the phone number (max 21 digits).
5. Press store button
Calling using memory locations
1. Lift the receiver and wait for a dialling tone.
2. Press memory button
3. Select memory location by pressing any of the number keys
Press if you want a pause in the telephone number..
r
Enter the name of the call receiver on the memory card, if desired. In case of a number change,
replace the old number with the new.
www.doro.com
Settings
.
m
and replace the receiver. The number is now stored.
P
.
m
(ignore the dialling tone).
P
English
- .
0 9
- .
0 9
5