Doro AFTI 20 Manuel D'utilisation page 4

English
Connection
1. Connect the curly cord to the handset and the socket marked
underneath the telephone.
2. Connect the telephone cord to the socket marked
telephone, and then to the telephone network socket.
3. A click will be heard when the modular plug is correctly in place.
4. Lift the handset and listen for the dial tone. Your telephone is now
operational.
Wall mounting
The telephone can be wall mounted by using two screws positioned vertically at
a distance of 100mm. Remove the desktop bracket and the screws should then
fit into the two 'keyholes' at the back of the telephone. This product can also be
mounted on a standard wall plate (Australia only)
Hearing Aid compatible
This telephone is hearing aid compatible. Select T mode on the hearing aid to
enable coupling.
Mute button
The handset microphone can be muted during a call by pressing the mute button
. Press the mute button again to activate the microphone. The LED next to
z
the button flashes when the microphone is muted.
Redial button
If the number dialled is engaged or if the last number dialled is to be redialled,
lift the receiver and press the redial button
Recall
Press the recall button
when connected to a PBX (TBR only).
Access to additional network services can be gained by using the recall button
and keys. Contact your network operator for more information.
* #
4
Operation
followed by the extension number to transfer calls
R
underneath the
T
.
r
q
,
R
www.doro.com