Menu Structure - IMG STAGELINE PARL-20DMX Mode D'emploi

up (indication of the address adjusted when the dis-
play is switched on).
The LED DMX (7) will light up when the spotlight is
operated via the DMX controller. When the spot-
light is set to music control in the 8-channel mode,
the LED SOUND (12) will flash to the beat of the
sound pulses picked up by the microphone (13).
Operation without DMX controller
When the spotlight is operated on its own, call up
the menu item for the operating mode ("Automatic"
, "Sound" or "Colour"
one of the setting options available. If required, use
the menu to set additional functions (e. g. speed for
the mode "Automatic" or sensitivity for the mode
"Sound").
For the master/ slave mode (
On the master unit, set the mode "Automatic" or
"Sound" and select the setting
item . Set the slave units to the slave mode
(menu item ).
The LED MASTER (10) will light up when the spot-
light is operated in the mode "Automatic" or
"Sound". In the mode "Sound", the LED SOUND
(12) will flash to the beat of the sound pulses picked
up by the microphone (13). The LED SLAVE (9) will
light up when the spotlight is operated in the slave
mode.
6.1 Operation of the menu
To operate the menu, use the four buttons (11) and
the display (8). The menu item
define the display time: display always on or dis-
play switched off after a given time. To switch it on
again, press any button.
1) After switching on the spotlight, the menu item
most recently selected will be called up. To exit
the menu item, press the button MENU or
ENTER.
2) To select a menu item, use the following but-
tons:
– the button MENU or
– the button (down)
3) To call up the menu item selected, press the but-
ton ENTER.
4) To set the menu item (e. g.
for the colour), use the button
For some menu items, e. g.
can be made.
5) To exit the menu item, press the button MENU
or ENTER.
) and select
chapter 1, step 5):
for the menu
is used to
(up)
for the address,
or .
, no setting

6.2 Menu structure

21 temperature indication
20 mode "colour" (colour spotlight mode)
behaviour of the spotlight after
19
loss of control signal
for service only
for service only
18 indication of firmware version
17 display indication rotated by 180°
16 test programs
15 display time
14 LEDs on / off
13 brightness of white
12 brightness of blue
11 brightness of green
10 brightness of red
9 total brightness
8 output of slave control signals
mode "Sound"
7
(music-controlled show programs)
6 sensitivity for the mode "Sound"
5 channel mode (number of DMX channels)
4 slave mode
3 speed for the mode "Automatic"
mode "Automatic"
2
(automatic show programs)
DMX start address /
1
operation with a DMX controller
GB
13