Warranty Conditions; Declaration Of Conformity - Büttner Elektronik MT ICC 1600 SI-N/60 A Mode D'emploi

9. Warranty conditions

BÜTTNER ELEKTRONIK GmbH warrants this product to be free from
defects in workmanship or materials for 24 months from the date of
purchase. During this period Büttner Elektronik will repair the defective
product free of charge. Büttner Elektronik is not responsible for any
costs of the transport of this product.
This warranty is void if the product has suffered any physical damage
or alteration, either internally or externally, and does not cover damage
arising from improper use , or from use in an unsuitable environment.
This warranty will not apply where the product has been misused,
neglected, improperly installed or repaired by anyone other than
BÜTTNER ELEKTRONIK. BÜTTNER ELEKTRONIK is not responsible
for any loss, damage or costs arising from improper use, use in an
unsuitable environment, improper installing of the product and
product malfunctioning.
Since BÜTTNER ELEKTRONIK cannot control the use and installation
(according to local regulations) of their products, the customer is
always responsible for the actual use of these products. BÜTTNER
ELEKTRONIK products are not designed for use as cricital components
in life support devices or systems, that can potentially harm humans
and/or the environment. The customer is always responsible when
implementing BÜTTNER ELEKTRONIK products in these kind of
applications. BÜTTNER ELEKTRONIK does not accept any responsibility
for any violation of patents or other rights of third parties, resulting
from the use of the BÜTTNER ELEKTRONIK product. BÜTTNER
ELEKTRONIK keeps the right to change product specifications without
previous notice.
Examples of improper use are:
- Too high AC input voltage applied
- Reverse connection of battery polarity
- Connecting wrong batteries (too high battery voltages)
- Mechanical stressed enclosure or internals due to
harsh handling or incorrect packaging
- Contact with any liquids or oxidation caused by condensation
18

10. Declaration of conformity

Manufacturer: Büttner Elektronik GmbH
Address: Dieselstr. 27
48485 Neuenkirchen
Germany
Declares that the following products:
Product Type: Inverter Charger Combination
Models: ICC 1600 SI-N / 60A, ICC 3000 SI-N / 120A
Conforms to the requirements of the following Directives of the
European Union:
EMC Directive 2004/108/EC
The above product is in conformity with the following harmonized
standards:
Low Voltage Directive 2006/95/EC
EN61000-6-3: 2001 EMC - Generic Emissions Standard
EN61000-6-2: 2005 EMC - Generic Immunity Standard
EN60335-1:
EN60335-2-29: 2004 Safety requirements for battery chargers
The product is RoHS compliant. It therefore complies with
the directive on the restriction of hazardous substances in
electrical and electronic equipment.
Please act according to your local rules and do not dispose
of your old products with your normal household waste.
The correct disposal of your old product will help prevent
potential negative consequences for the environment and
human health.
Notice of Copyright
ICC 1600-3000 inverter/charger combi owner's manual © 2017
BÜTTNER ELEKTRONIK GmbH. All rights reserved. No part of this
document may be reproduced in any form or disclosed to third parties
without the express written permission of BÜTTNER ELEKTRONIK
GMBH, Dieselstr. 27, 48485 Neuenkirchen. BÜTTNER ELEKTRONIK
GMBH reserves the right to revise this document and to periodically
make changes to the content hereof without obligation or organization
of such revisions or changes, unless required to do so by prior
arrangement.
1999 Generic safety standard
EN