Technical Specifications - Büttner Elektronik MT ICC 1600 SI-N/60 A Mode D'emploi

EN

8. Technical specifications

Parameter
Inverter stage
Output power P
1)
nom
P
surge
Output voltage / frequency
Output waveform
Input voltage (± 3 % tolerance): Nominal
Range
Maximum efficiency
Standby power consumption
No load power consumption
Charger stage
AC input voltage
Maximum continuous charging current
Standard charge voltage (bulk/float @ 25 °C)
Charge algorithm or program
Aux. Charge ouput power
AC Transfer switch
Maximum continuous current
Transfer time (typical)
General
Protections
DC connections
AC connections
Enclosure body size
Total weight
Protection class / Op. temp. / Storage temp.
Standards
Measured with resistive load. Power ratings are subject to a tolerance
1)
of 10 % and are decreasing as temperature rises with a rate of
approx. 1.2 % / °C starting from 25 °C.
Undervoltage limit is dynamic. This limit decreases with increasing
2)
load to compensate the voltage drop across cables and connections.
3) [ASB]
4)
17
ICC 1600 SI-N/60A
1600W
2500W
230Vac ± 2 % /50Hz ± 0.05 %
True sinewave (THD < /5 %
10.0
90mA@13V
< 10W [2.0W]
185 – 270Vac / 45 – 65Hz / PF > 0.95
60A
IUoUoP, intelligent 4 stage, temp. comp.
/
10Arms
0ms (inv. → mains) / < 5ms (mains → inv.)
high/low battery voltage, high temperature, overload, short circuit,
high ripple voltage and low AC input voltage
Two wires, length 1.5 meters,
35mm
2
Screw terminals
351 x 210 x 114mm
10.7kg
IP21 / -20 °C +50 °C / -40 °C +80 °C
CE marked meeting EMC directive 2004/108/EC and LVD 2006/95/EC
complying with EN60335-1, EN60335-2-29 and RoHS 2002/95/EC
Note: the given specifications are subject to change without notice.
Measured at nominal input voltage and 25 °C
3)
At higher ambient temperatures, maximum output current shall be
4)
reduced automatically
ICC 3000 SI-N/120A
3200W
5000W
@ P )
1)
nom
12V
– 16.5Vdc
2)
92 %
113mA@13V
< 20W [3.5W]
120A (4A)
14.4V / 13.2V
4A
16Arms
M10 bolt
terminals
370 x 431 x 132mm
19.0kg