General Information; Manufacturer's Address And International Contacts; Warranty Conditions; Information On The Internet - Burkert S022 Manuel Utilisateur

Various dangerous situations
To avoid injury take care:
• not to use fluid that is incompatible with the materials from
which the fitting or the adapter is made.
• not to use the fitting or the adapter in an environment incompa-
tible with the materials from which it is made.
• not to subject the fitting or the adapter to mechanical loads (by
placing objects on top of it or by using it as a step, for example).
• not to paint the internal or external threaded parts.
note
the fitting or the adapter may be damaged by the fluid in
contact with.
• Systematically check the chemical compatibility of the compo-
nent materials of the fitting or the adapter and the fluids likely
to come into contact with it (for example: alcohols, strong or
concentrated acids, aldehydes, alkaline compounds, esters,
aliphatic compounds, ketones, halogenated aromatics or hydro-
carbons, oxidants and chlorinated agents).
6
English
Type S022
Generalinformation
4.

GenerAl informATion

4.1. manufacturer's address and
international contacts
To contact the manufacturer of the fitting or the adapter use fol-
lowing address:
Bürkert SAS
Rue du Giessen
BP 21
F-67220 TRIEMBACH-AU-VAL
You may also contact your local Bürkert sales office.
The addresses of our international sales offices are available on the
internet at: www.burkert.com
4.2.

Warranty conditions

The condition governing the legal warranty is the conforming use of
the S022 adapter or fitting in observance of the operating conditions
specified in these operating instructions.
4.3.

information on the internet

You can find these operating instructions and technical data sheets
regarding the type S022 at: www.burkert.com