Installation, Commissioning; Safety Instructions - Burkert S022 Manuel Utilisateur

6.

inSTAllATion, commiSSioninG

6.1.

Safety instructions

danger
risk of injury due to high pressure in the installation.
• Stop the circulation of fluid, cut-off the pressure and drain the
pipe before loosening the process connections.
risk of injury due to high fluid temperatures.
• Use safety gloves to handle the fitting.
• Stop the circulation of fluid and drain the pipe before loosening
the process connections.
risk of injury due to the nature of the fluid.
• Respect the prevailing regulations on accident prevention and
safety relating to the use of hazardous products.
Warning
risk of injury due to non-conforming installation.
• Fluidic installation can only be carried out by qualified and
authorised personnel with the appropriate tools.
• Observe the installation instructions for the measuring device
inserted into the fitting or the adapter.
risk of injury due to an uncontrolled restart.
• Ensure that the restart of the installation is controlled after any
interventions on it.
18
English
Type S022
Installation,commissioning
Warning
risk of injury if the fluid pressure/ temperature dependency
is not respected.
• Take into account the fluid pressure / temperature dependency
according to the materials from which the fitting or the adapter
(see Fig. 2) and to the measuring device used are made (see
the relevant operating instructions).
Warning
danger due to nonconforming commissioning.
Non conforming commissioning may lead to injuries and damage
the fitting or the adapter and its surroundings.
• Before commissioning, make sure that the staff in charge have
read and fully understood the contents of the manual.
• In particular, observe the safety recommendations and intended
use.
• The installation must only be commissioned by suitably trained
staff.