Installation Of A Pvc True Union Connection On A Pipe - Burkert S022 Manuel Utilisateur

Masquer les pouces Voir aussi pour S022:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Installation,commissioning
Position the S022 adapter on the S020 T-fitting body.
Insert the 4 screws into the adapter.
Tighten the 4 screws in an alternating pattern to a torque of
1.5 Nm.
S022 adapter
S020 T-fitting body
6.2.6.
installation of a PVc true union
connection on a pipe
Use a PVC appropriate glue and respect the glue manufac-
turer's instructions.
Type S022
A
F
Roughen the surface "F" and the internal surface "E" of the work-
piece "B" with an emery cloth.
Wipe the surfaces"E" and "F" with blotting paper.
Scour the surfaces "E" and "F" then clean them with blotting
paper.
Let dry.
Eliminate any trace of humidity due to condensation.
Insert the ''A'' nut on the pipe.
Apply a layer of glue on surface "E".
Apply a thicker layer of glue on surface "F", strongly pressing the
brush in the direction of the axis.
Assemble the 2 glued workpieces to the stop, keeping them
aligned and without turning the workpieces.
Keep the workpieces together until the glue sets.
English
B C
E
D
23

Publicité

Table des Matières
loading

Table des Matières