Installation Of A Measurement Chamber; Maintenance And Troubleshooting; Safety Instructions - Burkert S022 Manuel Utilisateur

Maintenanceandtroubleshooting
→
Drill a hole 26 mm in diameter in the pipe.
→
Insert the seal provided in the saddle groove.
→
Fix the saddle to the pipe.
→
Insert the nuts into their housing.
→
Insert the screws into the nuts and tighten them.
Fig. 11 : Installing saddles
6.2.9. installation of a measurement
chamber
Fig. 12 : Installing the measurement chamber
Type S022
→
Install the measurement chamber
in the main pipe or in the bypass.
→
Pay attention to the flow direction
of the fluid indicated by the
arrows.
→
Screw the G 1/2'' connections to
the pipe.
7. mAinTenAnce And
TroubleShooTinG
7.1.

Safety instructions

danger
risk of injury due to high pressure in the installation.
• Stop the circulation of fluid, cut-off the pressure and drain the
pipe before loosening the process connections.
risk of injury due to high fluid temperatures.
• Use safety gloves to handle the fitting or the adapter.
• Stop the circulation of fluid and drain the pipe before loosening
the process connections.
• Keep all easily flammable fluid or material away from the fitting or
the adapter.
risk of injury due to the nature of the fluid.
• Respect the prevailing regulations on accident prevention and
safety relating to the use of aggressive fluids.
English
25