Installation Of A Pvc-U Or Pp, Metric Or Astm Adapter On A T-Fitting; Installation Of A Stainless Steel Metric Adapter On A Tank Or Pipe; Installation Of An Adapter With G 1¼'' Or Npt 1¼'' External Threading On A Tank, A Pipe Or A Saddle; Replace The Adapter Of An S020 T-Fitting With An S022 Adapter With G 1½" External Thread - Burkert S022 Manuel Utilisateur

6.2.2. installation of a PVc-u or PP, metric
or ASTm adapter on a T-fitting
S022 adapter
Metric adapter stuck
on T-fitting
6.2.3. installation of a stainless steel
metric adapter on a tank or pipe
S022 Adapter
Weld
Pipe
22
→
Stick the PVC-U
adapter to a T-fitting
of appropriate dimen-
sions in PVC-U, or
→
Weld the PP adapter
to a T-fitting d32x32
in PP with weld ends
→
Drill the tank or pipe
to a suitable diameter.
→
Weld the stainless
steel adapter directly
onto the tank or pipe.
English
Type S022
Installation,commissioning
6.2.4. installation of an adapter with G 1¼''
or nPT 1¼'' external threading on a
tank, a pipe or a saddle
In order the assembly is tight and strong install the device
on a wall min. 4 mm in thickness.
S022 adapter
Adapter with external
with external
thread, installed on
thread
a pipe
6.2.5. replace the adapter of an S020
T-fitting with an S022 adapter with
G 1½" external thread
→
Unscrew the 4 screws of the S020 adapter and remove it from
the fitting.
→
Remove the seal in place.
→
Clean the surfaces on which the seal rests.
→
Insert the O-ring, delivered with the S022, under the fitting body.
→
Drill and thread the
tank or the pipe to a
suitable diameter.
→
Screw the PVC-U
adapter directly onto
the tank, the pipe or
the saddle.
→
Render leak proof
using a suitable
material.