Sony T FUTURE LAB FL-101 Mode D'emploi page 5

4
Mount the unit to the stand.
Secure firmly with the screws (M4×8) supplied
with the table stand.
5
Connect the unit to a wall outlet.
To store the power cord
(mains lead) tidily
Route the cord along the
frame through its cord
clamps.
6
Touch  (power) to turn on.
Follow the on-screen instructions to complete
setup. If the image is not projected, visit the
following website to remedy the situation:
https://developer.sony.com/develop/future-lab-
program/t/get-started
 (power) key
5
GB