WMF LONO Mode D'emploi page 16

16
Shake the baby milk regularly while it is being warmed, so that it is warmed
up evenly.
▪ Risk of scalding, always check the temperature of the milk before you feed it
to your baby! The underside of your wrist is ideal as this area is temperature-
sensitive
▪ Recommendation: Feed the milk to your baby as soon as possible once it has
been warmed up. After warming, do not allow it to cool down and do not
reheat.
Programme: Warm up from 100 ml to 300 ml of baby milk (D)
▪ Select this programme to gentle warm up large quantities of baby milk to
body temperature.
▪ Fill the bottle warmer with drinking water to the fill level for baby milk,
although no higher than the "MAX" mark in the appliance.
▪ Press the On/Off button (A) until the required programme symbol is displayed.
After around three seconds without pressing the On/Off button (A) again, the
program starts automatically.
▪ Once it has reached body temperature, an audible signal is emitted and the
appliance goes into keep-warm mode. The maximum operating time for both
programmes together is around 60 minutes.
▪ If you feel that the contents are not warm enough, you can place the bottle/
jar back in the appliance to continue heating it.
Note: The warm-up period depends on the amount of the contents and the
starting temperature (i.e. refrigerator temperature or room temperature).Note:
Shake the baby milk regularly while it is being warmed, so that it is warmed
up evenly.
▪ Risk of scalding, always check the temperature of the milk before you feed it
to your baby! The underside of your wrist is ideal as this area is temperature-
sensitive
▪ Recommendation: Feed the solid baby food to your baby as soon as possible
once it has been warmed up. After warming, do not allow it to cool down and
do not reheat.
Programme: Heat up solid baby food (E)
▪ Select this programme to gently warm up large quantities of solid baby food
to body temperature.
▪ Fill the bottle warmer with drinking water to the fill level for baby food ,
although no higher than the "MAX" mark in the appliance.
▪ Press the On/Off button (A) until the required programme symbol is displayed.
After around three seconds without pressing the On/Off button (A) again, the
program starts automatically.
▪ Once it has reached body temperature, an audible signal is emitted and the
appliance goes into keep-warm mode. The maximum operating time for both
programmes together is around 60 minutes.
▪ If you feel that the contents are not warm enough, you can place the bottle/
jar back in the appliance to continue heating it.
Note: The warm-up period depends on the quantity of the contents and the
starting temperature (i.e. refrigerator temperature or room temperature).
Note: Stir the baby food regularly while it is being warmed, so that it is
warmed up evenly.