Before Using For The First Time - WMF LONO Mode D'emploi

Masquer les pouces Voir aussi pour LONO:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 20
Use
With the WMF Kitchenminis® baby food and bottle warmer, you can gently and safely heat up bottles
and jars for baby food, with a diameter of up to 72 mm, to body temperature. The baby food and
bottle warmer has five programmes (4) that cover the different requirements for warming up baby
food and other liquids. With the height-adjustable bottle/jar insert, bottles and jars of different
heights can be used in the bottle warmer. For this purpose, recesses of 4 different heights are
arranged. Use the handle, turn the height-adjustable bottle/jar insert to the desired height and lower
it down. The height-adjustable bottle/jar insert is now kept in the bottle warmer. When heating up
baby food, please note, that there should be no water from the bottle warmer in the food. This is why
the glass rim of the baby food jar always has to protrude from the bottle warmer.
Programme selector and on/off button (3)
C
B
A
A = Programme selector and on/off button
B = Programme: Keep-warm / defrost solid or liquid baby food
C = Programme: Small bottle: Warm up to 100 ml of baby milk
D = Programme: Large bottle: Warm up to 300 ml of baby milk
E = Programme: Heat up solid baby food
F = Programme: Quickly heat up baby milk and baby food

Before using for the first time

Cleaning
Before using the appliance for the first time, clean all parts (except the bottle warmer (2)) thoroughly
and then dry them. Please also note the cleaning notes in this instruction manual.
Operation and use
The baby food and bottle warmer may only be operated by using the On/Off and programme
selection buttons (A). To select the required programme, press the button repeatedly. The symbol for
the selected programme (B-F) is illuminated on the display.
▪ Connect the appliance to the mains. The appliance automatically does into standby mode (power
consumption < 0.5 Watt).
▪ Place the filled bottles/jars with or without the glass insert (1) in the bottle warmer (2).
▪ Fill the bottle warmer with drinking water to the fill level for baby food , although no higher than
the "MAX" mark in the appliance.
▪ Switch the appliance on by pressing the On/Off button (A).
▪ Select the required programme by repeatedly pressing the On/Off button (A), until the symbol for
14
D
E
F

Publicité

Table des Matières
loading

Table des Matières