Operation; Working Position - Gardena EasyCut Li-18/23 R Mode D'emploi

2,6Ah
ß ß ß ß ß
B L1 L2 L3 W

5. Operation

DANGER!
Setting the working position:
u
Battery charging status indicator during operation:
ß
v Press button on the battery.
B
66 – 99 % charged L1, L2 and L3 lit.
33 – 65 % charged L1 and L2 lit.
10 – 32 % charged L1 lit.
1 – 9 % charged L1 flashing.
0 % charged No indicator.
Risk of injury if the Turbotrimmer does not switch off when
you release the start button.
v Never bypass the safety devices or switches (e.g. by tying
the safety lock to the handle).
Risk of injury!
v Remove the battery prior to each adjustment of the
working position, to the shaft length, additional handle
or plant guard!

Working position 1:

Standard trimming
Working position 1:
For standard trimming.
Working position 2:
1. Press the foot pedal
desired working position.
2. Release the foot pedal
CAUTION! Avoid contact between the ground and the trimmer
head in working position 1 + 2.
Working position 2:
Trimming beneath
obstacles
u
and lower the shaft downwards into the
u
and allow the shaft to engage.
Working position 3:
Vertical trimming
of overhanging lawn
edges
19