Operation; Before You Do Operation; To Connect The Hedge Trimmer; Work Positions - Gardena ComfortCut 550 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 23

Before you do operation

WARNING!
Risc of physical injury!
Cut injury when the product starts
accidentally.
Disconnect the product from the mains
and slid the protective cover over the
blade before you connect or transport the
product.

To connect the hedge trimmer

WARNING!
Risc of electric shock!
To avoid damage to the mains cable (3)
the extension cable (4) must be inserted
into the cable lock (5).
Before you operate the product insert the
extension cable (4) into the cable lock (5)
Never take hold of the protective cover
when connecting the product.
5
7
6
1. Loop the extension cable (4), insert the loop into the
cable lock (5) and pull tight.
18

Operation

2. Connect the plug (6) of the product into the socket (7)
3. Connect the extension cable (4) into a 230 V mains

Work positions

The product can be operated in 3 positions.
Side trimming

To start the hedge trimmer

8
4
To start:
3
The product is fitted with a two-handed safety device (2
start buttons) to prevent the product from being turned on
by accident.
1. Remove the protective cover from the blade.
of the extension cable.
socket.
High trimming
WARNING!
Risc of physical injury!
Risc of injury if the product does not stop
when you release the start button.
Do not bypass the safety devices or
switches. For example do not attach the
start buttons (9)/(11) to the handle.
9
Low trimming
10
11
15 - 002 - 30.09.2016

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Comfortcut 600Powercut 700983398349835

Table des Matières