Turbotrimmer
Battery
Battery capacity
Battery charging time
Idling time *
Battery charger
Mains voltage
Max. output current
Output voltage
Measuring process complying with
* The actual running time may differ from the stated idle time depending on application, type of cuttings and state of maintenance.
The stated vibration emission value has been measured according to a standardised
test procedure and can be used for comparison of one electric power tool with
another. It can also be used for preliminary evaluation of exposure. The vibration
emission value can vary during actual use of the electric power tool.
11. Service / Warranty
Service:
Guarantee:
24
EasyCut Li-18/23 R
(Art. No. 9823)
approx. 3.5 h 80 % / approx. 5 h 100 %
approx. 60 min. (with full battery)
1)
IEC 60335-2-91
2)
RL 2000/14/EC.
Please contact the address on the back page.
GARDENA Manufacturing GmbH guarantees this unit for 2 years
(from date of purchase). This guarantee covers all serious defects
of the unit that can be proved to be material or manufacturing
faults. Under warranty we will either replace the unit or repair it
free of charge if the following conditions apply:
• The unit must have been handled properly and in keeping with
the requirements of the operating instructions.
• Neither the purchaser or a non-authorised third party have
attempted to repair the unit.
As wear parts, the blade and blade holder are excluded from the
warranty.
This manufacturer's guarantee does not affect the user's existing
warranty claims against the dealer / seller.
If you have problems with this unit, please contact our Service.
ComfortCut Li-18/23 R
(Art. No. 9825)
lithium ion (18 V)
2.6 Ah
230 V / 50 – 60 Hz
600 mA
18 V (DC)