Extended Menu - Comunello Automation MOWIN MCU Mode D'emploi

4) RAIN SENSOR (Rain sensor ON/OFF)
Disabling the Rain sensor
The control unit comes with the Rain sensor enabled (RAIN SENSOR LED ON). The Rain sensor may be disa-
bled in the following way: press the SEL button until the RAIN SENSOR LED flashes, then press the SET button
briefly; at this moment the RAIN SENSOR LED switches off and the Rain sensor will be disabled. Repeat the
procedure to enable the Rain sensor.

7. EXTENDED MENU

The control unit is supplied by the manufacturer with the option of selecting only the functions listed in the
main menu. To enable the extended menu functions proceed as follows: press and hold the SET button for
5 seconds; the SUN and RAIN LEDs will start flashing alternately. The user then has 30 seconds in which to
select the extended menu functions using the SEL and SET buttons. After 30 seconds the control unit returns
to the main menu.
Reference Led
1) CODE
2) CODE SENS.
3) T. MOT.
4) WIND SPEED
5) SUN SENSOR
6) RAIN SENSOR
7) SUN
8) RAIN
EXTENDED MEN
Led off
Remote PGM = OFF
Wired sensor Test = OFF
Aut. movement lock = OFF
Safety upward = OFF
SUN inversion = OFF
RAIN inversion = OFF
Flashing beacon ON/OFF
Flashing beacon ON/OFF
Led on
Remote PGM = ON
Wired sensor Test = ON
Aut. movement lock = ON
Safety upward = ON
SUN inversion = ON
RAIN inversion = OFF
9