Operation - Unold 86880 Notice D'utilisation

7. To avoid damage, never allow the remote control unit to fall from a signifi-
cant height.
8. On the rear of the operating element, there is a small holder on which you
can practically store the remote control unit.

OPERATION

1. Ensure that the appliance is standing on a suitable, level substrate, and has
been set up so that it is safe and stable.
2. Plug the power cord into an electrical outlet.
3. Press the „On/Speed" button (foot button on the base, or via the remote
control unit).
Setting the tilt angle
4. You can tilt the motor housing horizontally to a certain extent. To do this,
press the motor housing into the desired tilt angle. To avoid damage to the
appliance, do not use force.
Setting the speed
5. The symbol
the appliance is now running at medium speed, thereafter it switches auto-
matically to the low speed.
6. Press the „On/Speed" button repeatedly until the appliance is working in
the desired speed mode. The current setting appears in the display.
Low speed:
Symbol
Medium speed:
Symbol
High speed
Symbol
Setting the mode
7. Press the „Mode" button and select the desired operating mode. You can
select Standard mode, Near Natural mode, and Sleep mode. Press the
„Mode" button repeatedly until the desired setting appears in the display.
Copyright UNOLD AG | www.unold.de
lights up and moves clockwise. For the first three seconds,
21