Operation; Setting The Speed; Swing Function/Oscillation Function; Setting The Tilt Angle - Rotel U7722CH Mode D'emploi

 OPERATION
o
Ensure that the appliance is standing on a suitable, level substrate, and has been set
up so that it is safe and stable.
o
Plug the power cord into an electrical outlet.

Setting the speed

o
Switch on the appliance by selecting one of the three speed levels and setting the
selected speed level via the speed regulator:
 Level 1: Light breeze
 Level 2: Moderate breeze
 Level 3: Strong breeze
 The regulator position "0" switches off the appliance.
o
You can change between the different speed levels at any time.

Swing function/oscillation function

o
Press the oscillation button on the rear of the appliance head downward (see illus-
tration). The appliance now swings autonomously in a radius of 80°
o
If you want to switch off the swing function, pull the oscillation button upward.

Setting the tilt angle

o
You can tilt the motor housing horizontally to a certain extent
(approx. 20°). Slightly unscrew the knurled screw (see illustra-
tion).
o
Tilt the basket cover to the desired angle. Caution: Only tilt the
cover in the intended range and not beyond the point of tangible
resistance, to avoid damaging the appliance.
o
Fix the fan in place in the set tilt angle by tightening the knurled
screw.

Switching off

o
To switch off the appliance, switch the speed regulator to "0".
o
When you are no longer using the appliance, unplug the plug from the electrical out-
let.
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instruction for use
34