Vetus ILTCONW Instructions D'installation Et Mode D'emploi page 16

Positioning
Install the tank in such a way that it is easily ac­
cessible for inspection. The tank should always
be installed above the maximum bilge water
level.
Also ensure that there is sufficient free space
at the top of the tank for the hose connection.
This connection must be easily reached during
installation. For ventilation, the tank should
have a free space of about 1 cm (3/8") from
bulkheads or other tanks.
Make sure the tank has a sufficiently secure
foundation on which to install it and secure it
properly.
The dimensions of the tank will increase a
little when it is filled. Take this into account
when fixing the tank.
Fix the tank securely with the fitting straps
from the installation kit; these will accommo­
date the expansion of the tank.
16
110141.01
70 mm
70 mm
vetus® Connection kit for waste water tanks
± 30 mm