Handsfree Calling (Via Bluetooth Only); Receiving A Call; Making A Call - Sony WX-GS920BH Mode D'emploi

Handsfree Calling (via BLUETOOTH
only)
To use a cellular phone, connect it with this unit.
You can connect two cellular phones to the unit. For
details, see "Preparing a BLUETOOTH Device"
(page 7).

Receiving a Call

1
Press CALL when a call is received with a
ringtone.
The phone call starts.
Note
The ringtone and talker's voice are output only from the
front speakers.
To reject the call
Press and hold OFF for 1 second.
To end the call
Press CALL again.

Making a Call

You can make a call from the phonebook or call
history when a cellular phone supporting PBAP
(Phone Book Access Profile) is connected.
When two cellular phones are connected to the
unit, select either phone.
From the phonebook
1
Press CALL.
When two cellular phones are connected to the
unit, rotate the control dial to select either
phone, then press it.
2
Rotate the control dial to select [PHONE
BOOK], then press it.
3
Rotate the control dial to select an initial
from the initial list, then press it.
4
Rotate the control dial to select a name
from the name list, then press it.
16
GB
5
Rotate the control dial to select a
number from the number list, then press
it.
The phone call starts.
From the call history
1
Press CALL.
When two cellular phones are connected to the
unit, rotate the control dial to select either
phone, then press it.
2
Rotate the control dial to select [RECENT
CALL], then press it.
A list of the call history appears.
3
Rotate the control dial to select a name
or phone number from the call history,
then press it.
The phone call starts.
By phone number input
1
Press CALL.
When two cellular phones are connected to the
unit, rotate the control dial to select either
phone, then press it.
2
Rotate the control dial to select [DIAL
NUMBER], then press it.
3
Rotate the control dial to enter the
phone number, and lastly select [ ]
(space), then press ENTER*.
The phone call starts.
* To move the digital indication, press /
(SEEK –/+).
Note
[_] appears instead of [#] on the display.
By redial
1
Press CALL.
When two cellular phones are connected to the
unit, rotate the control dial to select either
phone, then press it.
2
Rotate the control dial to select [REDIAL],
then press it.
The phone call starts.