4- How to control the unit ?
DMX 512 Address Setting
1. Tap the either the MENU, UP, or DOWN buttons until "ADDR" is displayed, press
ENTER.
2. "
" will now be displayed. Press the UP or DOWN buttons to ind your
desired address.(
few seconds the address will be saved into memory.
This will let you switch between 6 Channel DMX mode and
2Ch/3Ch/4Ch/6Ch/7Ch/14Ch Channel DMX mode.
1. Tap the either the MENU,UP button until "
"
" to "
2. Tap the UP or DOWN buttons to choose your desired DMX mode and press
ENTER to confirm and exit.
This will let you set unit as a master or slave in a master/slave
configuration.
1. Tap the either the MENU,UP button until "
"
" to "
2. Tap the UP or DOWN buttons until your desired setting is displayed, press ENTER
to confirm and exit.
in this mode you can choose your desired sound active show
1. Tap the either the MENU,UP button until "
to
2. Tap the UP or DOWN buttons to scroll through sound active shows.
3. Select your desired show by pressing the ENTER button to confirm and exit.
to
"6 DMX mode will be displayed.
" will be displayed.
Sound mode program will be displayed.
) Leave the display on this address, and after a
" is displayed, press ENTER.
" is displayed, press ENTER.
" is displayed, press ENTER.
16