Technical Specifications; How To Set The Unit - BoomToneDJ Duo Roll LED Mode D'emploi

Press any button to turn the display on again.
(3) Regardless of the program in which model, as long as the program control signals
were observed,the program will
automatically jump to the controllermodel, after that, if you disconnect the control
signals, the program will jump to the front of the console mode of the model
(4) From the machine model and controller model

3. Technical Specifications

- Quad Roller DMX
- Equipped with 2 LEDs 15W 4in-1 RGBW
- Precise beams Red, green, blue and white
- 4 operation modes: DMX, Master / Slave, Automation & Musical
- 2 DMX modes: 1 or 8 channels
- Integrated programs
- Barrel movements on X / Y axis
- Mounting bracket and safety eyebolt included
- No cooling cycle the unit does not heat
- Life LEDs: 50 000 hours
- Power consumption: 60W
- Power supply: 110 / 230Vac 60 / 50Hz
- Dimensions : L325 x W310 x H250 mm
- Weight: 4.5 kg
- Complies with CE and RoHS
- Protection IP20 Standard

4. How To Set The Unit

To select any of the given functions, press the MENU button up to the required one is shown
on the display. Select the function by ENTER button and the display will blink. Use DOWN
and UP button to change the mode. Once the required mode has been selected, press the
ENTER button to setup or it will automatically return to the main functions without any
change after idling 10 seconds. To go back to the functions without any change press the
MENU button. The main functions are shown below:
11