Technical Specifications; How To Set The Unit - BoomToneDJ Moving Bar 8X15 Mode D'emploi

2. Technical Specifications


Auto, Sound active, DMX, Master/slave

DMX modes:9/38CH

8 pcs 15W high power RGBW LED moving beam light

8 pixels, a separate control of the RGBW beam effect, dedicated advanced optical
systems.

High speed strobe and pulse strobe effect,0-100% smooth linear dimmer

Built in programs with or without DMX controller.

Movement range: 180°

Power supply: 100-240Vac,50-60Hz

Power consumption: 120W

Light source: 8pcs 15Watt CREE 4 in One Ultra Bright LEDs

Bulb life: Rated 60,000 hrs

Dimensions:L1050×W80×H160 mm

Packing size:1120*150*210MM

G.W:7.5Kg

3. How To Set The Unit

To select any functions, press the MENU button until the required function is showing on the
display. Select the function by pressing the ENTER button and the display will blink. Use the
and button to change the mode. Once the required mode has been selected, press
The ENTER button to setup to go back to the functions without any changes press the
MENU button again. Hold and press the MENU button for one second or wait for one minute
to exit the menu mode.
The main functions are shown below:
9