2- Unit Description
The BoomtoneDJ PAR IP 7x10w Quad is a fixture that can be used
under high humidity conditions and moist environments.
Buttons :
1. MENU
menu
2. UP
3. DOWN
4. ENTER
5. Signal indicator light
In DMX or SLAVE mode, the Signal indicator light flashing when signals are
detected
6. Mains input:Connect to supply mains power.
7.Mains output:Connect to supply mains power for the next unit.
8. DMX input: For DMX512 link, use 3-pin XLR plug cable to input DMX signal.
9. DMX output:For DMX512 link, use 3-pin XLR plug cable to link the next unit.
Note:
(1) In ten seconds, if no buttons to press, the LED display will be off.
(2) After pressing a button, all the parameters will save
automatically after 2 seconds.
(3) No matter the item is in which program in which mode, once
3- Technical Specifications
Power supply:AC100-240V 50/60Hz
Fuse:F3A/250V
Power Supply:Input/output block
Light source:7x10 Watt RGBW Quad LEDs
Channels:4, 6, 8 DMX channels
Dimensions :L215×W215×H320mm
Gross Weight:4.6 kg
To go forward in the selected functions or go back the last layer
To go forward in the selected functions or increase parameters
To go backward in the selected functions or reduce parameters
To go into the next layer menu
Press any button to turn the display on again.
detecting DMX or SLAVE signal, the program will jump into
DMX or SLAVE mode automatically. Then, if DMX/SLAVE
signal off, the program will return to the original mode .
10