Connecting An Av Receiver Or Amplifier - Pioneer ELITE BDP-62FD Mode D'emploi

Connecting an AV receiver or
amplifier
Connect to an AV receiver or amplifier in order to enjoy
the surround sound of Dolby TrueHD, Dolby Digital Plus,
Dolby Digital, DTS-HD Master Audio, DTS-HD High
Resolution Audio or DTS Digital Surround. For
instructions on connecting the TV and speakers to the AV
receiver or amplifier, refer to the operating instructions
for AV receiver or amplifier.
Caution
• Hold the plug when connecting and disconnecting
the cable.
• Placing a load on the plug could result in faulty
contact and no video signals being output.
Match the
direction of the
plug to the
terminal and
insert straight.
From HDMI output
HDMI cable
terminal to HDMI input
(commercially
terminal
available)
TV
Player's rear panel
HDMI cable
(commercially available)
AV receiver
or amplifier
AV receiver AV receiver AV receiver
or amplifier or amplifier or amplifier
Direction of signal flow
Achieving better video and sound quality
When connecting one TV (or projector) and AV amplifier
to the player, connect in such a way that the video and
audio signals are transferred separately in order to
achieve higher quality video and sound.
Match the
direction of the
plug to the
terminal and
insert straight.
TV
Caution
• Make sure to set HDMI Mode to Separate (page 39).
• If the AV amplifier connected to the HDMI OUT (SUB)
terminal is also connected to a TV, the TV's input may
switch automatically. If this happens, turn off the
control function with HDMI on the TV.
Player's rear panel
HDMI cable
(commercially available)
AV receiver
or amplifier
Direction of signal flow
02
19
En