Connecting To The Digital Audio Terminal Or Audio Jacks - Pioneer BDP-330 Mode D'emploi

Connections

Connecting to the Digital Audio Terminal or Audio Jacks

• You can connect audio equipment or the TV to the DIGITAL OUT OPTICAL terminal or AUDIO OUTPUT jacks.
• See page 55 for information on the output of next generation audio formats.
STEPS
1 Be sure to turn off this Player and the equipment before making any connections.
2 Firmly connect an optical digital cable (commercially available) or AV cable (supplied) to the optical digital
audio terminals or audio jacks ( and , or  and ).
(White)
(Red)
To AUDIO OUTPUT

jacks
Video/audio cable
(supplied)
(White) (Red)
VIDEO L - AUDIO -R
White Red
AV INPUT
TV
Audio equipment with a digital audio input terminal
After connecting
• Load a disc and start playback. (Page 28)
20
Rear panel of this Player
USB USB
White
Red

To AUDIO input
jacks
OPTICAL
DIGITAL AUDIO IN
Amplifier
• When using OPTICAL output,
5.1 ch Digital Output is available.
7.1 ch Digital Output is not available.
NOTE:
7.1 ch Audio is available via the HDMI terminal.
To DIGITAL OUT
OPTICAL terminal
Optical digital cable
(commercially available)
To OPTICAL

input terminal
