Laser Classification - Futech GYRO GS Mode D'emploi

WARNING
If the product is improperly disposed of, the following can happen:
EN
• If polymer parts are burnt, poisonous gases are produced which may impair health.
•
If batteries are damaged or are heated strongly, they can explode and cause poison-
ing, burning, corrosion or environmental contamination.
•
By disposing of the product irresponsibly you may enable unauthorized persons to
use it in contravention of the regulations, exposing themselves and third
parties to the risk of severe injury and rendering the environment liable to
contamination.
Precautions:
The product must not be disposed with household waste.
Dispose of the product appropriately in accordance with the national
regulations in force in your country.
General
The following directions (in accordance with the state of the art - international
standard IEC 60825-1(2007-03) and IEC TR 60825-14 (2004-02)) provide instruction and
training information to the person responsible for the product and the person who actu-
ally uses the equipment, to anticipate and avoid operational hazards.
The person responsible for the product must ensure that all users understand these
directions and adhere to them.
Products classified as laser class 1, class 2 and class 3R do not require
•
laser safety officer involvement,
•
protective clothes and eyewear,
• special warning signs in the laser working area if used and operated as defined
in this user manual due to the low eye hazard level. Products classified as laser class
2 or class 3R may cause dazzle, flash blindness and afterimages, particularly under
low ambient light conditions.
52 Gyro GS

LASER CLASSIFICATION

www.laseto.be