Viewing Recorded Data; Deleting Recorded Data; Setting Wake-Up And Alarm Functions - Conrad RW 53 Notice D'emploi

c) Viewing Recorded Data
• Briefly push the button "HISTORY"; "HIS" appears in the upper right of the display.
• Pushing the button "MIN/MAX" repeatedly after this will display the recorded data of the last 3, 6, 9, 12, 15, 18, 21 or
24 hours.
• Briefly press the button "HISTORY" to leave the display mode (alternatively do not push any button for 30 seconds).
d) Deleting Recorded Data
• Briefly push the button "HISTORY"; "HIS" appears in the upper right of the display.
• Briefly push the button "SET"; "CLEAR" flashes in the display.
• Keep the button "SET" pushed for 2 seconds now; then all saved data are deleted.
• Briefly push the button "HISTORY" to leave deletion mode (alternatively do not push any button for 30 seconds).
e) Setting Wake-Up and Alarm Functions
When certain measured values are exceeded or undercut, the weather station may output a signal sound. A wake-up
time can be set as well. The following settings can be made:
Mode "HI AL" (= High-Alarm, alarm when a
set measured value is exceeded)
• Setting alarm time
• Wind speed
• Gust speed
• Wind direction
• Rain volume in 1h
• Rain volume in 24h
• Outdoor humidity
• Outdoor temperature
• Wind chill temperature
• Dewpoint temperature
• Indoor humidity
• Indoor temperature
Mode "LO AL" (= Low-Alarm, alarm when a set
measured value is undercut)
• Setting alarm time
• Outdoor humidity
• Outdoor temperature
• Wind chill temperature
• Dewpoint temperature
• Indoor humidity
• Indoor temperature
37