Important Safety Precautions - Gloria 405 T Mode D'emploi

Table of Contents
Technical data . . . . . . . . . . . . . . .18
Important Safety Precautions . . . . .19
Getting Started . . . . . . . . . . . . . .21
Spraying . . . . . . . . . . . . . . . . . .23
Assembly transport cart . . . . . . . .23
Emptying and Servicing . . . . . . . . .24
Tips . . . . . . . . . . . . . . . . . . . . .26
Declaration of conformity . . . . . . . .27
Important Safety
Precautions
Repairs to BRILL GLORIA house
and garden equipment should only
be carried out by BRILL GLORIA
Service Stations. Order spare parts
from your authorised BRILL GLO-
RIA dealer. If the required parts are
not in stock, he will procure them
for you as quickly as possible.
● These BRILL GLORIA high pressure
spray units are suitable to deliver all
types of spray agent (for Group 2
fluids in accordance with Directive
97/23/EC) in hobby, handicraft and
industrial applications.
● Only use normal commercial prod-
ucts, by themselves (pH value
5-10). Mixtures of differing products
can cause unpredictable and dan-
gerous chemical reactions. The tank
is not to be filled with acidic materi-
als with pH value ≤ 5 or with sol-
vents or strongly corrosive agents.
● Observe the instructions provided by
the manufacturer of the agent being
sprayed. Certain spraying agents re-
quire face masks, protective
glasses, protective gloves or other
safety measures.
● Observe the guidelines for liquid jet
pumps ZH 1/406: The liquid jet pump
is to be inspected by a trained techni-
cian as required, and at least every 12
months, to ensure that continued safe
operation is possible. The instructions
of the manufacturer are to be fol-
lowed. The inspection can be delayed
until the next time that the unit is used
if it is to be put away for some time
(see Emptying and Servicing).
● Ignitable explosive mixtures must
not be used. Exception: in an area
not at risk from explosion. In such a
case the Guideline for Protection
Against Explosion (EX-RL) and the
Ordinance on Inflammable Liquids
(VbF) must be observed, keep the
unit in a well-ventilated area, away
from sources of ignition, do not
smoke, keep it away from inflam-
mable materials. Do not pour the
residue down the drain. Avoid the
buildup of electrostatic charges
through earthing (see Startup).
In the event of a fire, use fire class B
19