Important Safety Precautions - Gloria 141 T Spezial Mode D'emploi

Innenseiten.qxd
GB
Table of Contents
Technical data . . . . . . . . . . . . . . .11
Important Safety Precautions . . . . .12
Getting Started . . . . . . . . . . . . . .14
Spraying . . . . . . . . . . . . . . . . . .15
Emptying and Servicing . . . . . . . . .15
Declaration of conformity . . . . . . . .16
Important Safety
Precautions
Repairs to GLORIA house and gar-
den equipment should only be car-
ried out by GLORIA Service Sta-
tions. Order spare parts from your
authorised GLORIA dealer. If the
required parts are not in stock, he
will procure them for you as
quickly as possible.
● These GLORIA high pressure spray
units are suitable to deliver all types
of spray agent in hobby, handicraft
and industrial applications.
● Only use normal commercial prod-
ucts, by themselves (pH value
5-10). Mixtures of differing products
can cause unpredictable and dan-
gerous chemical reactions. The tank
is not to be filled with acidic materi-
als with pH value ≤ 5 or with sol-
vents or strongly corrosive agents.
04.05.2006 17:01 Uhr Seite 12
● Observe the instructions provided by
the manufacturer of the agent being
sprayed. Certain spraying agents re-
quire face masks, protective
glasses, protective gloves or other
safety measures.
● Observe the guidelines for liquid jet
pumps ZH 1/406: The liquid jet pump
is to be inspected by a trained techni-
cian as required, and at least every 12
months, to ensure that continued safe
operation is possible. The instructions
of the manufacturer are to be fol-
lowed. The inspection can be delayed
until the next time that the unit is used
if it is to be put away for some time
(see Emptying and Servicing).
● Ignitable explosive mixtures must
not be used. Exception: in an area
not at risk from explosion. In such a
case the Guideline for Protection
Against Explosion (EX-RL) and the
Ordinance on Inflammable Liquids
(VbF) must be observed, keep the
unit in a well-ventilated area, away
from sources of ignition, do not
smoke, keep it away from inflam-
mable materials. Do not pour the
residue down the drain. Avoid the
buildup of electrostatic charges
through earthing (see Startup). In the
event of a fire, use fire class B extin-
guishing agents (powder, foam, CO
or lightwater), but not water.
12
2