Connecting Antennas; Using External Antennas; Plugging In - Pioneer X-CM35-K Mode D'emploi

03 Connections

Connecting antennas

• Connect the AM loop antenna and the FM wire antenna
as shown below.
• To improve reception and sound quality, connect
external antennas (see Using external antennas).
ANTENNA
4
1 Connect the AM antenna wires.
Holding the connector to connect.
2 Fix the AM loop antenna to the attached
stand.
Set up as illustrated above.
3 Place the AM antenna on a flat surface and
in a direction giving the best reception.
• Place the antenna near a window, etc. for the best
reception.
• Do not place the antenna near a computer or TV. It may
result in noise.
4 Connect the FM wire antenna into the FM
antenna socket.
For best results, extend the FM antenna fully and fix to a wall
or door frame. Don't drape loosely or leave coiled up.
12
En
2
3
1
2
1
AM
LOOP
FM
UNBAL 75 Ω
3

Using external antennas

To improve FM reception
Use a PAL connector (not supplied) to connect an external FM
antenna.
One-touch PAL
connector
75 coaxial
cable

Plugging in

Before making or changing the connections, switch off the
power and disconnect the power cord from the AC outlet.
After you've finished making all connections, plug the unit
into an AC outlet.
This unit's rear panel
SPEAKERS
LINE
IN
R L
R L
To AC outlet
CAUTION
• Do not use any power cord other than the one supplied
with this unit.
• Do not use the supplied power cord for any purpose
other than that described above.
ANTENNA
FM
UNBAL 75 Ω
AC IN
Power cord