Error Messages; Possible Causes - Knick Stratos Pro A2 Oxy Série Guide Rapide

Info text
(is displayed in case of
Error
fault when the Info key is
pressed)

Error Messages

Problem

Possible causes

Error in factory settings
EEPROM or RAM defective
This error message only occurs
in the case of a total defect. The
device must be repaired and
recalibrated at the factory.
Error in confi guration or
calibration data
Memory error in device program
Configuration or calibration data
defective; completely reconfig-
ure and recalibrate the device.
No module
Please have the module
replaced in the factory.
Wrong module
Please have the module replaced
in the factory.
System error
Restart required.
If error still persists, send in the
device for repair.
O sensor *
2
Sensor defective
Sensor not connected
Break in sensor cable
Wrong sensor *
ISM sensor devaluated *
15